Spray Hood
-
David Hudson
- CC19 Association Member
- Posts: 174
- Joined: Sun Jul 26, 2009 7:49 am
- Location: Newcastle Upon Tyne
-
Pugwash
- Non Association Member
- Posts: 36
- Joined: Fri Sep 17, 2010 3:41 pm
- Location: Lincolnshire
Lotus eating motor sailers?
Must have been something I said?
Funny you say that I sold a Fisher 30 to buy "Robyn".
Time will tell if I am ard enough to have me shirt off at football matches pet.
Pugwash
Funny you say that I sold a Fisher 30 to buy "Robyn".
Time will tell if I am ard enough to have me shirt off at football matches pet.
Pugwash
-
David Hudson
- CC19 Association Member
- Posts: 174
- Joined: Sun Jul 26, 2009 7:49 am
- Location: Newcastle Upon Tyne
- Dennis
- CC19 Association Member
- Posts: 1168
- Joined: Fri Mar 27, 2009 5:29 pm
- Location: Northumberland
Mastband/gooseneck.
Hello all
I have posted some photos of the new (raised) mastband/gooseneck arrangement on Mary Ann.
I launched (at Kielder) on 24th March and also managed a 3 hour sail. Initial impressions are all good.
1) Much improved head room in the cockpit.
2) Better visibility from a "normal" seating position in the cockpit.
3) Can now sail with the hood up.
4) No noticible change in sailing characteristics.
In addition I have used eye-nuts to attach the upper of the two bands. This will enable me to use a conventional jib pole and use these eye-nuts as the attachment point.
I have also used these nuts a (temporary) attachment for a strut when raising the mast using the trailer winch (effortless).
Cheers
Dennis
CC19 #100 mary Ann
I have posted some photos of the new (raised) mastband/gooseneck arrangement on Mary Ann.
I launched (at Kielder) on 24th March and also managed a 3 hour sail. Initial impressions are all good.
1) Much improved head room in the cockpit.
2) Better visibility from a "normal" seating position in the cockpit.
3) Can now sail with the hood up.
4) No noticible change in sailing characteristics.
In addition I have used eye-nuts to attach the upper of the two bands. This will enable me to use a conventional jib pole and use these eye-nuts as the attachment point.
I have also used these nuts a (temporary) attachment for a strut when raising the mast using the trailer winch (effortless).
Cheers
Dennis
CC19 #100 mary Ann
-
David Hudson
- CC19 Association Member
- Posts: 174
- Joined: Sun Jul 26, 2009 7:49 am
- Location: Newcastle Upon Tyne
- Dennis
- CC19 Association Member
- Posts: 1168
- Joined: Fri Mar 27, 2009 5:29 pm
- Location: Northumberland
-
Timbre 19
- CC19 Association Member
- Posts: 44
- Joined: Wed Nov 05, 2014 11:16 am
Re: Spray Hood
Hello,
goes in sprayhood thoughts. Have read about the benefits of using a Goose Neck on the Mast. But if you do not wish it, how could you do then?
Can one imagine a different design of sprayhood with less width? So you can easily reach the deck with raised sprayhood.
Admittedly, as with other disadvantages (wetter!). But different owners appreciate different things.
Accompany a photo of a couple of variations on a Maxi 77. Can a similar design be interesting for CC19?
Ask for comments and experiences.
Regards Jörgen
#Building Timbre
goes in sprayhood thoughts. Have read about the benefits of using a Goose Neck on the Mast. But if you do not wish it, how could you do then?
Can one imagine a different design of sprayhood with less width? So you can easily reach the deck with raised sprayhood.
Admittedly, as with other disadvantages (wetter!). But different owners appreciate different things.
Accompany a photo of a couple of variations on a Maxi 77. Can a similar design be interesting for CC19?
Ask for comments and experiences.
Regards Jörgen
#Building Timbre
You do not have the required permissions to view the files attached to this post.
-
erbster
- CC19 Association Member
- Posts: 712
- Joined: Fri Apr 06, 2012 7:57 pm
- Location: Midlands
- Contact:
Re: Spray Hood
I'm sure some owners have spray hoods which don't involve a raised boom- doesn't it just depend on the curvature of the hood. I looked into getting one fitted to my boat, but didn't in the end due to cost. The UK manufacturers I looked at custom make their hoods (though several have previously made hoods for CCs). I went for a (much cheaper) boom cover to use when moored if raining.
-
Timbre 19
- CC19 Association Member
- Posts: 44
- Joined: Wed Nov 05, 2014 11:16 am
Re: Spray Hood
Hello and thanks for your reply. I agree that you can bet on a boom cover first. I think I will do that. It will be useful even if you get a spray hood later.
But now I have made a prototype of a gooseneck that probably allows an original spray hood. But the idea is particularly to be able to sail with a higher sail plan when it is not blowing hard.
(And with the lower level you can fold the mast as the original). A photo of my Goose Neck is in the album "Building Timbre".
Regards Jörgen
But now I have made a prototype of a gooseneck that probably allows an original spray hood. But the idea is particularly to be able to sail with a higher sail plan when it is not blowing hard.
(And with the lower level you can fold the mast as the original). A photo of my Goose Neck is in the album "Building Timbre".
Regards Jörgen
-
Mark Donnelly
- CC19 Association Member
- Posts: 5
- Joined: Sun Apr 03, 2016 4:19 pm
Re: Spray Hood
Having recently relocated to the NorthWest of Scotland I am concidering adding a spray hood to my CC19 (Moonstruck). The comments about the spray hoods on the forum are quite historic now. Can any one recommend a manufacturer of spray hood ?. I'm am intending to raise the goose neck and boom to allow more clearance whilst sailing..