by Ru88ell » Mon Feb 07, 2011 4:51 pm
I've completely stripped out the electrics and plan to re-install later this month. Zephyr came with a 60Ah Delphi battery which is holding charge very well. I've set it up with a NASA BM1 Compact on the bench and will be easily able to test everything before it goes in.
At the moment full electrics list is looking like this:-
Delphi 60Ah battery*
NASA BM1 Compact
6 way fused switch panel
2 x LED (mr11) cabin lights* (changed bulbs from halogen which drew 0.9A - to LED drawing only 0.1A)
Icom M411 VHF*
Anchor light (unknown)*
NASA Clipper Duet*
NASA Clipper Wind*
Simrad TP10 tiller pilot*
12v charge point (drawing 0.3A to charge iPhone)
*came with boat
Since I plan to trailersail often I'm replacing the connectors at the base of the mast with Vtronix for the VHF coax and Bulgin for NASA Wind cable and anchor light. The switch panel and VHF will fit in a panel fitted inside the companionway bulkhead.
I've never done any 12v DC stuff before, so this is a learning curve for me. I'm coming to terms with it now though, and look forward to getting in there and setting it all up.
Russell